Electrician wiring a panel

City & Guilds 2346-03 EWA Experienced Work Route

City & Guilds Course

Qualification:

The City & Guilds 2346-03 EWA Experienced Work Route is for electricians who have been working in the industry for at least 5 years (not including time spent in full or part time training) but have not formally completed an industry apprenticeship or equivalent Level 3 NVQ qualification.

£1800 inc VAT
Weekdays
City & Guilds 2346-03 EWA Experienced Work Route

Course Details

As AET is now a JIB Member the EWA registration now comes with the temporary JIB EWR card which will come with a automatic upgrade to JIB Gold card when you complete the EWA process.
This is charged at an additional charge of £89.99 inc VAT.

So we can establish you qualify for the 2346-03 EWA. Please can all learners complete the following fillable forms and forward to info@allelectricaltraining.com

The new EWA 2346-03 will be replacing the 2356-99 MCA (mature candidate assessment) and will require the learner to hold new and additional qualifications before you can be enrolled.
The current MCA 2356-99 qualification will no longer be available after the end November 2020. Certification end 2022.

The new EWA 2346-03 will use performance units from:-

  • Learner will need to enrol on the EWA if you have technical certs in: 2330 level 2 & 3 or 2351 or the old 236 / 2360
  • PLEASE NOTE: IF YOU DO NOT REQUIRE A JIB GOLD CARD YOU CAN JUST ATTEND THE AM2 ASSESSMENT WITHOUT REQUIRING A LEVEL 3 TECHNICAL / NVQ QUALIFICATION

Each learner will first need to complete a skill scan and background check form, before they can enrol.
These will be discussed and finalized by your allocated assessor during your professional discussion prior to being accepted on new route.
If the skill scan does not meet the criteria the assessor will advise what is required on upgrading your technical qualifications to improve your skill set and knowledge.

Each learner will need to complete all Lv3 Performance Units by building a portfolio, (Logbook available from C&G web site). These units are assessed on the course and past evidence cannot be used.
PLEASE NOTE: It is mandatory the learner achieved their 18th Edition and a 2391-50 Initial (4 day course) Verification, 2394 fundamentals Inspection & Testing or equivalent Initial Verification Qualification before booking an AM2E assessment.

PLEASE NOTE: For more information on the EWA from JIB website or applying for a ECS JIB card while you are undertaking your portfolio assessment. Please see links below:

https://www.jib.org.uk
https://www.ecscard.org.uk/card-types/electrotechnical/experienced-worker

Entry Requirements

Units required to achieve EWR Qualification

  • Requirements for Electrical Installations (2382) City & Guilds 2382
  • Level 3 Award in Periodic Electrical Inspection and Testing (2391-50) City & Guilds 2391
  • There are six Level 3 Performance Units to be assessed before you can gain the Experienced Worker qualification: (2346-03) Level 3 Electrotechnical Experienced Worker Qualification
  1. Apply Health, Safety and Environmental Considerations
  2. Organise and Oversee the Electrical Work Environment
  3. Apply Design and Installation Practices and Procedures (109) or Applied Practices and Procedures for Maintenance (110)
  4. Terminate and Connect Conductors
  5. Inspect, Test and Commission Electrical Systems
  6. Apply Fault Diagnosis and Rectification
  7. Proxy claim 2382 claim
  8. Proxy claim 2391-50 claim

City & Guilds 2346-03 EWA Experienced Work Route

Q&A

Is this the right qualification for me?

The Experienced Worker Assessment is for electricians who have been working in the industry for at least 5 years (not including time spent in full or part time training) but have not formally completed an industry apprenticeship or equivalent Level 3 NVQ qualification. You will need to demonstrate knowledge, understanding and competence to the standard of the Level 3 electrotechnical apprenticeship. There is a Skills Scan at the start of the process to assess this.

How long will it take to complete the Experienced Worker Assessment?

This will depend on what evidence you already have that counts towards the qualification. For instance, if you hold the BS 7671:2018 qualification and/or the Initial Verification qualification you can eliminate the time and cost needed to gain those. We estimate anywhere between 3 and 15 months depending on what evidence you need to provide. Most of the time spent will involve portfolio building and on-site assessment of your current work.

Will there be a logbook available – Yes

How do they administer the skills scan?

The Skills Scan is designed to help assess the learner’s eligibility for the Experienced Worker Qualification. There is a self-assessment of the depth of knowledge, skill and experience expected of the assessment. The centre is then responsible for verifying the learner’s suitability and recording on the Skills Scan.

This is an auditable part of the Awarding Organisation’s external quality assurance requirements, importantly this must be undertaken by occupationally competent staff.

What is AM2E?

The AM2E is a practical assessment where you have to carry out a series of tasks covering safe isolation, installation, fault finding and inspection and testing, which are then marked by an assessor. It is identical to the AM2S assessment which is taken by apprentices at the end of their training programme. You can find out full details about each section of the AM”E and the tasks you’ll need to carry out on the NET website.

Duration and Costs

Costs and breakdown charge are as follows:

  • NVQ level 3 EWA 2346-03 would be charged at £1500.00 + VAT (£1800.00 inc VAT)
    Course duration: 3-8 months

PLEASE NOTE: EWA REGISTRATION AFTER 4TH SEPTEMBER 2023 AM2E v1.1 charges will apply.

  • AM2E would be charged at £865 + VAT (£1038.00 inc VAT) up to 31st March 2024
  • AM2E 1.0 would be charged at £910 + VAT (£1092.00 inc VAT) From 1st April 2024
  • AM2E v.1.1 would be charged at £1200 + VAT (£1440.00 inc VAT) From 1st April 2024
  • Assessment duration:- 2/3 days
  • 2391-50 Initial verification would be charged at £582.50 + VAT (£699.00 inc VAT) ( 6 day course)
    Course duration:- 6 days

(Recommended upgrade option to 2391-52 initial & periodic Inspect & test + FREE resit online exam for £199 inc VAT)
Course duration:- 6 days

PLEASE NOTE: The EWA NVQ level 3 technical certificate can not be claimed until you have completed both 2391 inspection & Testing and 18th Edition. Therefore AET will be requesting and booking the learner on these 2 courses first before starting the EWR portfolio.

Contact the office on 01279 433321 for more details

Contact us for more information and bookings